Cửa hàng
-
PETROLIMEX PLC SUPERTRANS INSULATING OIL
PLC SUPERTRANS is a high-quality electrical insulating oil, refined from premium mineral base oil through solvent and hydrogenation processes, then dehydrated and degassed under vacuum pressure to remove moisture and enhance dielectric properties. The product is nitrogen-treated to inhibit oxidation and contains antioxidant additives, delivering excellent cooling, insulating, and oxidation stability performance.
-
MobilTherm 605
Mobiltherm 605 heat transfer oils are high performance products intended for use in closed indirect heating installations. They are recommended for use in cold-oil sealed, indirect heating and cooling systems in all kinds of industrial processes.
Mobiltherm heat transfer oils are formulated from highly refined base stocks that are resistant to thermal cracking and chemical oxidation. They are very thermally stable and are capable of an extremely long service life without deposit formation or viscosity increase.
Mobiltherm heat transfer oils have good heat transfer efficiency and their viscosities are such that they can be pumped readily at both start-up and operating temperatures. They demonstrate specific heat and thermal conductivities that provide more rapid heat dissipation. The flash points of these oils will not decrease significantly in service because of their resistance to thermal cracking at the operating temperatures for which they are recommended.
-
Sinopec TVAI Super Transformer Oil
SINOPEC Super Transformer Oil is blended with highly refined mineral oil and a selected antioxidant. It is designed for insulating and cooling transformers, oil-immersed switch-gear, and other electrical insulating applications. SINOPEC Super Transformer Oil doesn’t contain polychlorinated biphenyls (PCBs).
-
Sinopec Transformer Oil (special)
Sinopec Insulated Transformer Oil is a series of products blended using highly refined mineral oil and a selected antioxidant. It is designed for insulating and cooling transformers, oil-immersed switch-gear, and other electrical insulating applications. There are four grades, I-0℃, I-10℃, I-30℃, and I-40℃, which are selected based on their low-temperature performance. None of the grades contain harmful polychlorinated biphenyls (PCBs).
-
Sinopec Transformer Oil (general)
Sinopec Insulated Transformer Oil is a series of products blended using highly refined mineral oil and a selected antioxidant. It is designed for insulating and cooling transformers, oil-immersed switch-gear, and other electrical insulating applications. There are four grades, I-0℃, I-10℃, I-30℃, and I-40℃, which are selected based on their low-temperature performance. None of the grades contain harmful polychlorinated biphenyls (PCBs).
-
Sinopec Naphthenic Transformer Oil
Sinopec Insulated Transformer Oil is a series of products blended using highly refined mineral oil and a selected antioxidant. It is designed for insulating and cooling transformers, oil-immersed switch-gear, and other electrical insulating applications. There are four grades, I-0℃, I-10℃, I-30℃, and I-40℃, which are selected based on their low-temperature performance. None of the grades contain harmful polychlorinated biphenyls (PCBs).
-
Sinopec L-QD 400 Synthetic Heat Transfer Oil
Sinopec L-QD 400 Synthetic Heat Transfer Oil has excellent high-temperature thermal stability and is a kind of bicomponent synthetic aromatic substance with a conjugated structure. It is recommended for use as a heat transfer fluid in closed, forced, or unforced circulation systems where the bulk oil temperature does not exceed 390℃. It is widely used in petroleum chemicals, synthetic fiber, synthetic resin, medicine, printing and dyeing, power generation, and other industries.
-
Sinopec L-QD 340 Synthetic Heat Transfer Oil
Sinopec L-QD 340 Synthetic Heat Transfer Oil is formulated using high purity synthetic aromatics which have excellent high-temperature thermal stability. It is recommended for use as a heat transfer fluid in closed, forced or unforced, circulation systems where the bulk oil temperature does not exceed 330℃. It is widely used in petroleum chemicals, synthetic fiber, synthetic resin, medicine, printing and dyeing, and other industries.
-
Sinopec L-QC 320 Heat Transfer Oil
Sinopec L-QC 320 Heat Transfer Oil is formulated using refined special narrow fraction mineral base oil and special additives with excellent detergency-dispersibility and high-temperature oxidation resistance. It is recommended for use as a heat transfer fluid in closed heat-transfer systems where the bulk oil temperature does not exceed 310℃. It is widely used in the petroleum chemical industry, synthetic fiber, synthetic resin, medicine, printing and dyeing, and other industries.
-
Sinopec L-QB 300 Synthetic Heat Transfer Oil
Sinopec L-QB 300 Synthetic Heat Transfer Oil is formulated using high purity synthetic aromatics which have excellent high-temperature thermal stability, and various additives such as detergents, dispersants, high-temperature antioxidants, etc. It is recommended for use as a heat transfer fluid in closed and open heat circulation systems where the bulk oil temperature does not exceed 290℃. It is widely used in petroleum chemicals, synthetic fiber, synthetic resin, medicine, printing and dyeing, power generation, and other industries.
-
Sinopec L-QB 300 Heat Transfer Oil
Sinopec L-QB 300 Heat Transfer Oil is formulated using refined special narrow fraction mineral base oil and additives with excellent detergency-dispersibility and high-temperature oxidation resistance. It is recommended for use as a heat transfer fluid in closed and open heat circulation systems where the bulk oil temperature does not exceed 290℃. It is widely used in petroleum chemical, synthetic fiber, synthetic resin, medicine, printing and dyeing, and other industries.
-
Sinopec U8251 Isothermal Quenching Oil
Sinopec U8251 Isothermal Quenching Oil is based on secondary hydrorefined mineral oil, with various functional additives such as high-temperature antioxidants, cold reminder agents, and brighteners. It is applicable for small deformation of carburized steel, bearing steel, etc.
