Spheerol™ CV Performance 180KG
Castrol Spheerol™ CV Performance is a high-quality lubricating grease developed primarily for the tough trucking environment. This gel-type grease is formulated with a combination of base oil, special lithium complex thickener technology, and performance additives.
PRODUCT DETAILS
Product Description Castrol Spheerol™ CV Performance is a high-quality lubricating grease developed primarily for the tough trucking environment. This gel-type grease is formulated with a combination of base oil, special lithium complex thickener technology, and performance additives.
Application Spheerol CV Performance exhibits excellent mechanical and thermal stability, making it particularly suitable for use in the wheel bearings of passenger cars, buses, farm equipment, off-highway, and on-highway commercial vehicles, including New Generation Multi-Axle trucks for long haul service.
Advantages
- Excellent mechanical stability: Ensures that an effective lubricant film is maintained between contact surfaces for extended periods.
- Outstanding thermal stability: Provides prolonged resistance to the effects of heavy braking.
- Excellent water resistance: Improves product retention over extended working periods, leading to increased equipment/bearing life.
- Superior corrosion protection and good extreme pressure properties: Enhances component life and reduces maintenance.
Typical Characteristics
| Name | Method | Units | Spheerol CV Performance |
|---|---|---|---|
| Thickener Type | – | – | Lithium complex |
| Base oil type | – | – | Mineral |
| Color | Visual | – | Blue |
| Appearance | Visual | – | Smooth and Homogenous |
| Consistency (NLGI grade) | ASTM D217 | – | 2.5 |
| Penetration grease @ 25°C, 60 cycles | ASTM D217 | 1/10 mm | 250-280 |
| Penetration difference worked 100,000 strokes | ASTM D217 | 1/10 mm | 20 max |
| Shell Roll Stability 50h/80°C | ASTM D1831 | 1/10 mm | 80 max |
| Base Oil Viscosity @ 40°C | ASTM D445 | mm²/s | 200 min |
| Base Oil Viscosity @ 100°C | ASTM D445 | mm²/s | 10-14 |
| Drop Point | ASTM D2265 | °C | 215 min |
| Oil Separation (Greases), 168h @ 40°C | DIN 51817 | % wt | 3 max |
| Copper Corrosion, 24 hrs @ 100°C | ASTM D4048 | Rating | 1b max |
| SKF Emcor corrosion test (distilled water) | ISO 11007 | Rating | 0/0 max |
| Rust Test (distilled water) | ASTM D1743 | Rating | Pass |
| Water Wash-out (1 hr @ 79°C) | ASTM D1264 | % wt loss | 10 max |
| Four Ball Weld Load | ASTM D2596 | Kg | 200 min |
| Four ball wear, Scar | ASTM D2266 | mm | 0.9 max |
| Oxidation stability 100h @ 100°C | DIN 51808 | bar | 0.35 max |