Sinopec Turbine Oil L-TSA Classic 32
Sinopec L-TSA Classic Turbine Oil is available in ISO viscosity grades 32, 46, and 68. Formulated with high-quality base oil and selected additives, it offers good oxidation stability and corrosion protection along with good demulsibility, antifoaming, and air release properties.
PRODUCT DETAILS
Sinopec L-TSA Classic Turbine Oil is available in ISO viscosity grades 32, 46, and 68. Formulated with high-quality base oil and selected additives, it offers good oxidation stability and corrosion protection along with good demulsibility, antifoaming, and air release properties.
Applications:
Sinopec L-TSA Classic Turbine Oil is suitable for use in:
- Steam turbines used in industrial power generation.
- Large to moderate marine steam turbine propulsion machinery and associated auxiliary equipment.
- Industrial steam turbines, gas turbines, and water turbines.
- Circulating systems, anti-friction bearings, enclosed gears, hydraulic units, and other industrial applications, providing there is no requirement for antiwear additives.
- Applications where there is not a strict requirement for oil cleanliness.
Features and Benefits:
- Good oxidation stability prolongs the service life of the oil and increases service intervals.
- Good air release properties protect against air entrainment and ensure optimum oil film thickness, protecting equipment components.
- Good antifoaming properties avoid the build-up of foam and reduce oil leakage from the system.
- Good water separation properties ensure that any water contamination can be easily separated from the oil, protecting equipment against rusting and corrosion and extending oil life.
-
Anti-rust and corrosion prevention properties further protect equipment from rusting and corrosion and extend equipment life.
Typical Properties and Specifications:
| Property | 32 | 46 | 68 |
|---|---|---|---|
| Kinematic Viscosity of Base Oil, ASTM D 445 | – | – | – |
| cSt @ 40℃ | 32.5 | 45.2 | 68.9 |
| cSt @ 100℃ | 5.50 | 6.81 | 9.01 |
| Viscosity Index of Base Oil, ASTM D 2270 | 105 | 105 | 102 |
| Air Release at 50℃, min, ASTM D 3427 | 2.1 | 2.7 | 5 |
| Foaming Characteristics, Sequences 1, 2, and 3, ASTM D 892 | 32 | 46 | 68 |
| Foaming Characteristics, Sequence 1 | 10/0 | 10/0 | 10/0 |
| Foaming Characteristics, Sequence 2 | 20/0 | 20/0 | 20/0 |
| Foaming Characteristics, Sequence 3 | 10/0 | 10/0 | 10/0 |
| Demulsibility @ 54℃, Time to 3 ml Emulsion, min, ASTM D 1401 | 8 | 10 | 15 |
| Neutralisation Number, mg KOH/g, ASTM D 974 | 0.07 | 0.08 | 0.09 |
| Oxidation Stability, Time to 2 mg KOH/g, hours, ASTM D 943 | >5500 | >5000 | >3500 |
| Oxidation Stability, RPVOT @ 150℃, min, ASTM D 2772 | 600+ | 600+ | 500+ |
| Rust Prevention, ASTM D 665 | – | – | – |
| Distilled Water | Pass | Pass | Pass |
| Synthetic Sea Water | Pass | Pass | Pass |
| Copper Corrosion, 3 hours @ 100℃, ASTM D 130 | 1b | 1b | 1b |
| Pour Point, ℃, ASTM D 97 | -12 | -12 | -12 |
| Flash Point (COC), ℃, ASTM D 92 | 200 | 210 | 222 |
| Density @ 15℃, kg/l, ASTM D 4052 | 0.8653 | 0.8687 | 0.8705 |